Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2024 Aug 2:12:1369514.
doi: 10.3389/fbioe.2024.1369514. eCollection 2024.

Three-dimensional printed models as an effective tool for the management of complex congenital heart disease

Katia Capellini  1 , Lamia Ait-Ali  2 , Vitali Pak  3 , Massimiliano Cantinotti  4 , Michele Murzi  5 , Emanuele Vignali  1 , Benigno Marco Fanni  1 , Alberto Clemente  6 , Simona Celi  1 , Emanuele Gasparotti  1
Affiliations

Three-dimensional printed models as an effective tool for the management of complex congenital heart disease

Katia Capellini et al. Front Bioeng Biotechnol. .

Abstract

Introduction: Three-dimensional printed models are widely used in the medical field for surgical and interventional planning. In the context of complex cardiovascular defects such as pediatric congenital heart diseases (CHDs), the adoption of 3D printed models could be an effective tool to improve decision-making. In this paper, an investigation was conducted into the characteristics of 3D printed models and their added value in understanding and managing complex pediatric congenital heart disease, also considering the associated cost.

Methods: Volumetric MRI and CT images of subjects with complex CHDs were retrospectively segmented, and the associated 3D models were reconstructed. Different 3D printing technologies and materials were evaluated to obtain the 3D printed models of cardiac structures. An evaluation of time and costs associated with the 3D printing procedure was also provided. A two-level 3D printed model assessment was carried out to investigate the most suitable 3D printing technology for the management of complex CHDs and the effectiveness of 3D printed models in the pre-surgical planning and surgical strategies' simulations.

Results: Among the different techniques, selective laser sintering resulted to be the most suitable due to its reduced time and cost and for the positive clinical feedback (procedure simulation, surface finish, and reproduction of details).

Conclusion: The adoption of 3D printed models contributes as an effective tool in the management of complex CHDs, enabling planning and simulations of surgical procedures in a safer way.

Keywords: 3D models; 3D printing; congenital heart disease; pediatric surgery; pre-planning.

PubMed Disclaimer

Conflict of interest statement

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Figures

FIGURE 1
FIGURE 1
Examples of CT (A) and MR dataset (B) with the associated volume rendering visualization and the corresponding reconstructed 3D models (C, D).
FIGURE 2
FIGURE 2
Examples of the 3D printed model of case 3 by using FDM (A), SLA, (B) and SLS (C) for first level of evaluation, with detail magnification. Examples of 3D models and the corresponding 3D printed models of cases manufactured with SLS and used for second level of evaluation (D).
FIGURE 3
FIGURE 3
Reports of the clinical team evaluation for 3D printing technologies (first level of evaluation) (A) and for the impact of 3D printed models on pre-planning (second level of evaluation) (B–D).
See this image and copyright information in PMC

Similar articles

See all similar articles

References

    1. Awasthi P., Banerjee S. S. (2021). Fused deposition modeling of thermoplastic elastomeric materials: challenges and opportunities. Addit. Manuf. 46, 102177. 10.1016/j.addma.2021.102177 - DOI
    1. Awori J., Friedman S. D., Chan T., Howard C., Seslar S., Soriano B. D., et al. (2021). 3d models improve understanding of congenital heart disease. 3D Print. Med. 7, 26–29. 10.1186/s41205-021-00115-7 - DOI - PMC - PubMed
    1. Awori J., Friedman S. D., Howard C., Kronmal R., Buddhe S. (2023). Comparative effectiveness of virtual reality (vr) vs 3d printed models of congenital heart disease in resident and nurse practitioner educational experience. 3D Print. Med. 9, 2–8. 10.1186/s41205-022-00164-6 - DOI - PMC - PubMed
    1. Bozkurt Y., Karayel E. (2021). 3d printing technology; methods, biomedical applications, future opportunities and trends. J. Mater. Res. Technol. 14, 1430–1450. 10.1016/j.jmrt.2021.07.050 - DOI
    1. Buonamici F., Mussi E., Santarelli C., Carrabba N., Stefano P., Marchionni N., et al. (2022). Modelling and fabrication procedure for a 3d printed cardiac model-surgical planning of left ventricular aneurysm. MethodsX 9, 101822. 10.1016/j.mex.2022.101822 - DOI - PMC - PubMed

LinkOut - more resources