Auditory masking of tonal and conspecific signals by continuous active sonar, amplitude modulated noise, and Gaussian noise in killer whales (Orcinus orca)

Abstract

Continuous active sonar is thought to mitigate severe acoustic impacts due to its lower sound pressure level compared to pulsed active sonar typically used by world navies. However, due to its almost continuous duty cycle, continuous active sonar could have a higher potential for auditory masking. Here, we evaluate the auditory masking potential of several noise types including a recording of continuous active sonar, amplitude modulated noise, and Gaussian noise, on signal detection in two killer whales. Signals were either a 1.5 kHz pure tone or a recording of a broadband burst-pulse killer whale call. For the 1.5 kHz tone, all noise types resulted in statistically significant masking, however, there was a release from masking of approximately 13 dB for the amplitude-modulated noise. When the killer whale call was the signal, the whales employed an off-frequency listening strategy where the whales were able to detect frequency components of the signal that did not directly overlap with the noise. However, this strategy was less useful for the continuous active sonar noise due to its broadband harmonic structure. Continuous active sonar has spectral features that considerably overlap with those of killer whale calls, making this type of noise an effective auditory masker.