Antibacterial effect of new photocatalytically active "complex oxides/PMMA" composites under visible-light irradiation
- PMID: 39612098
- DOI: 10.1007/s43630-024-00664-w
Antibacterial effect of new photocatalytically active "complex oxides/PMMA" composites under visible-light irradiation
Abstract
New photocatalytic materials based on complex oxides and a widely used and cheap polymer (PMMA) have been prepared. Among complex oxides previously investigated, the following have been used-RbTe1.5W0.5O6, CsTeMoO6, CsV0.625Te1.375O6, NaVMoO6, KVMoO6. For comparison, the binary oxides TiO2 and WO3 were used. The form of PMMA matrix was used as sponge and glass. The amount of powder in PMMA was selected based on retaining the polymer properties and getting the photocatalytic activity, which corresponds to 1% powder in sponge and 0.5% in glass. The "photocatalyst/PMMA" composites decompose the methylene blue under visible and UV light as well as possess antibacterial properties. The high electron-hole recombination was found out for composites photocatalysts, which significantly influences only on organic compounds decomposition in solutions. However, there is no direct dependence between effective photodegradation of simple organic molecules and antimicrobial properties. Inactivation of bacteria is determined by many factors such as active generated radicals, adsorption properties of the surface and the photocatalyst form, which can change the main active radicals. The comparison of photocatalytic action on organic solutions and bacteria of initial powders and PMMA composites allow choosing the most effective combination for further application. The most promising antimicrobial properties for composites have been obtained using compounds with β-pyrochlore structure.
Keywords: Antibacterial properties; Complex oxide; PMMA; Photocatalysis; Polymer compositions.
© 2024. The Author(s), under exclusive licence to the European Photochemistry Association, European Society for Photobiology.
Conflict of interest statement
Declarations. Conflict of interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
References
-
- Ali, N., Ali, F., & Khurshid, R. (2020). TiO2 nanoparticles and epoxy TiO2 nanocomposites: A review of synthesis, modification strategies, and photocatalytic potentialities. Journal of Inorganic and Organometallic Polymers and Materials, 30, 4829–4846.
-
- Stokes, H.T., Campbell, B.J., Hatch, D.M. FINDSYM, ISOTROPY Software Suite. iso.byu.edu.
-
- Chadwick, N., Sathasivam, S., Kafizas, A., Bawaked, S. M., Obaid, A. Y., Al-Thabaiti, S., Basahel, S. N., Parkin, I. P., & Carmalt, C. J. (2013). Combinatorial aerosol assisted chemical vapour deposition of a photocatalytic mixed SnO2/TiO2 thin film. Journal of Materials Chemistry A, 2(14), 5108–5116.
-
- Prakash, J., Sun, S., Swart, H., et al. (2018). Noble metals-TiO2 nanocomposites: From fundamental mechanisms to photocatalysis, surface enhanced Raman scattering and antibacterial applications. Applied Materials Today, 11, 82.
Grants and funding
LinkOut - more resources
Full Text Sources