Anatomic analysis of removed prosthetic heart valves: causes of failure of 33 mechanical valves and 58 bioprostheses, 1980 to 1983

Abstract

The details of heart valve prosthesis-associated problems are not widely known. This study investigated the etiologies of the failures of 91 valves, 33 mechanical prostheses and 58 bioprostheses, obtained at reoperation (83) or autopsy (eight) at the Brigham and Women's Hospital during the 42-month period from mid- 1980 through 1983, one to 264 months (mean, 72 months) after valve replacement. Analysis was by gross, histologic, radiographic, and microbiologic examination, as well as review of clinical records. Overall causes of failure included paravalvular leak (15 per cent), thrombosis (7 per cent), tissue overgrowth (8 per cent), degeneration or mechanical failure (43 per cent), and endocarditis (19 per cent). Endocarditis and paravalvular leak were equally frequent with mechanical prostheses and bioprostheses. In addition, thrombosis (18 per cent), tissue overgrowth (21 per cent), and structural failure (12 per cent) were all important failure modes for mechanical prostheses. Sterile degeneration was the overwhelming cause of failure for bioprostheses, accounting for the failure of 35 of 58 (60 per cent) of those recovered. Sterile degeneration took several forms: calcification, with or without cuspal tears (27 cases, 47 per cent of bioprostheses; mean, 77 months, range, 44 to 108 months) and cuspal defects without calcification (eight cases, 14 per cent; mean, 59 months, range, eight to 122 months). In general, calcification increased with time after implantation, but the propensity for the mineralization of bioprostheses varied widely among patients. Four torn valves that had been in place for more than six years had radiographically undetectable calcific deposits. The results of this study indicate that paravalvular leak and endocarditis are frequent causes of failure for all valve types. No clear failure mode predominates with mechanical valve prostheses, although some designs have specific inherent limitations. In contrast, degeneration, especially that related to mineralization, is the most important cause of the late failure of contemporary bioprostheses.