Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2025 Apr 14;12(2):131-140.
doi: 10.1089/3dp.2023.0356. eCollection 2025 Apr.

Toward a Digital Design Framework for the Thermal Tunability of 3D Printed Envelopes

Elena Petruzzi  1 , Alexandros Tsamis  1 , Chaitanya Ullal  2
Affiliations

Toward a Digital Design Framework for the Thermal Tunability of 3D Printed Envelopes

Elena Petruzzi et al. 3D Print Addit Manuf. .

Abstract

Large-scale extrusion-based additive manufacturing (AM) has emerged as a potential alternative for construction, addressing the challenges associated with the high carbon footprint of the building industry. Although AM enables the creation of intricate design geometries through controlled material deposition, providing innovative solution strategies for design construction, large-scale 3D printed structures are limited to a single homogeneous material, such as cement or clay, and their functionality is restricted to load-bearing formwork. Although still at a nascent stage for building construction, multimaterial additive manufacturing (MMAM) has emerged as a promising technology for the industry to overcome this limitation and reduce the embodied carbon of 3D printed structures by limiting the use of structural materials through topology optimization strategies. MMAM enables the fabrication of functionally graded materials (FGMs) by controlling the extrusion ratio between two or more distinct materials, resulting in building envelopes with multiple performance characteristics and functions. While research has focused on improving the structural performance of 3D-printed envelopes through MMAM, limited attention has been given to optimizing thermal performance and energy efficiency. An increasing interest in thermal energy storage technologies for buildings using the latent heat storage capacity of microencapsulated phase change materials (mPCMs) is related to the advantages of improving energy efficiency using materials that can absorb, store, and release heat when their temperature changes. To this end, this study proposes an FGM design-to-construction methodology for large-scale structures that optimizes the thermal performance of 3D-printed envelopes by locally tuning the distribution of heterogeneous mixes of clay and mPCMs during the AM process. The results of the digital simulations and physical tests show that the local optimization of mPCM and clay within the wall thickness according to the specific temperature differential can provide annual energy reductions compared with a homogeneously printed envelope without embedded mPCM.

Keywords: differential materials; digital framework; functionally graded materials; thermal optimization.

PubMed Disclaimer

References

    1. Khoshnevis B, Hwang D, Yao KT, et al. . Mega-scale fabrication by Contour Crafting. Int J Ind Syst Eng 2006;1(3):301; doi: 10.1504/IJISE.2006.009791 - DOI
    1. Kallipoliti L, Tsamis A.. Teleplasty: The Basis of Chemosynthetic Design. In: First International Conference on Critical Digital: What Matter(s)?. Harvard University Graduate School of Design: Cambridge; 2008; pp. 383–392.
    1. Oxman N. Variable property rapid prototyping: Inspired by nature, where form is characterized by heterogeneous compositions, the paper presents a novel approach to layered manufacturing entitled variable property rapid prototyping. Virtual Phys Prototyp 2011;6(1):3–31; doi: 10.1080/17452759.2011.558588 - DOI
    1. Craveiro F, Nazarian S, Bartolo H, et al. . An automated system for 3D printing functionally graded concrete-based materials. Addit Manuf 2020;33:101146; doi: 10.1016/j.addma.2020.101146 - DOI
    1. Craveiro F, Bártolo H, Bártolo PJ. Functionally graded structures through building manufacturing. Adv Mater Res 2013;683:775–778; doi: 10.4028/www.scientific.net/AMR.683.775 - DOI