Effect of Pulse Modulation on Diode-Pumped Laser Lithotripsy
- PMID: 40420523
- DOI: 10.1089/end.2024.0733
Effect of Pulse Modulation on Diode-Pumped Laser Lithotripsy
Abstract
Introduction: This study addresses pulse modulation for kidney stone lithotripsy using diode-pumped thulium yttrium aluminum garnet (Tm:YAG, λ = 2.02 µm) and thulium fiber lasers (TFLs, λ = 1.94 µm). Three research questions were investigated: (1) What are the effects of varying pulse duration and energy of the first pulse and varying the interpulse delay in a pulse modulation sequence to increase energy transfer across saline to a stone? (2) Does an optimal pulse modulation profile exist in a single-pulse sequence to provide highest percent radiant energy transfer? (3) Does a higher effective energy transfer to the stone using pulse modulation produce greater stone volumetric removal? Materials and Methods: We measured radiant energy transmission efficiency (RETE) and ablation volumes in phantom and human stones. RETE was utilized to compare the pulse energy transmission through air and saline media. We recorded fast camera traces and vapor bubble collapse pressures. Craters were created at fiber standoff distances (SDs) of 0.0 mm, 0.5 mm, and 1.0 mm, and volumes were measured using optical coherence tomography. Results: For Tm:YAG laser irradiation, dual-pulse mode significantly increased RETE by as much as 75% at 1 mm SD compared with single-pulse mode. With the Tm:YAG laser, an optimal "dual-pulse" modulation resulted in greater volumetric removal compared with a "single-pulse" across all stone cohorts (p < 0.05) except for calcium oxalate monohydrate stones (p = 0.38) at a 1 mm SD. TFL yielded similar results, but showed heterogeneity across stone compositions. Conclusions: Pulse-modulated diode-pumped Tm:YAG and TFL can deliver higher photon count through a saline layer if the first pulse is optimized. An optimal pulse modulation profile where the second pulse is synchronized with the vapor bubble dynamics of the first pulse results in the highest percent RETE and increased stone volumetric removal.
Keywords: TFL; diode laser; laser lithotripsy; pulse modulation; thulium; thulium:YAG.
MeSH terms
LinkOut - more resources
Full Text Sources