Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2025 Jul 31;15(1):27911.
doi: 10.1038/s41598-025-10516-x.

Optimization of separation and purification processes in diethyl ether production for improved efficiency and sustainability

Amin Hedayati Moghaddam  1 , Morteza Esfandyari  2
Affiliations

Optimization of separation and purification processes in diethyl ether production for improved efficiency and sustainability

Amin Hedayati Moghaddam et al. Sci Rep. .

Abstract

This study focuses on optimizing the separation and purification processes in diethyl ether (DEE) production to enhance energy efficiency, reduce waste, and improve product quality. Utilizing process simulation with Aspen-Hysys-V14, statistical modeling, and optimization techniques, this study investigates operational parameters across key units, including two drums and two distillation columns. Design of experiment was performed using response surface methodology (RSM) and central composite design (CCD). Key results indicate that under optimized conditions, a DEE purity of 96.43% was achieved with total energy consumption of 2,150,566 kJ/h, corresponding to an energy requirement of 1,499,754.87 kJ/kmol of DEE. Scenario-based optimization minimized DEE loss in fuel and vent streams while balancing energy demands. Non-linear relationships between parameters, such as temperature and pressure, were modeled with high predictive accuracy. These findings contribute to the development of sustainable and cost-effective DEE production processes and offer transferable insights for similar chemical manufacturing systems.

Keywords: Diethyl ether; Energy efficiency; Process optimization; Sustainability.

PubMed Disclaimer

Conflict of interest statement

Declarations. Competing interests: The authors declare no competing interests.

Figures

Fig. 1
Fig. 1
Process flow diagram (PFD) of separation and purification section in DEE production process.
Fig. 2
Fig. 2
Effects of temperature and pressure on DEE flowrate and cooler energy consumption in drum1.
Fig. 3
Fig. 3
Composition of the top stream in distillation column1 under varying operational conditions.
Fig. 4
Fig. 4
Energy consumption in heater and reboiler of distillation column 1 as a function of key operational parameters.
Fig. 5
Fig. 5
Effects of temperature and pressure on DEE flowrate and cooler energy consumption in drum2.
See this image and copyright information in PMC

References

    1. Wu, L. et al. Process intensification of NaOH-catalyzed transesterification for biodiesel production by the use of bentonite and co-solvent (diethyl ether). Fuel186, 597–604 (2016).
    1. Encinar, J. M., Pardal, A. & Sánchez, N. An improvement to the transesterification process by the use of co-solvents to produce biodiesel. Fuel166, 51–58 (2016).
    1. Gargari, M. H. & Sadrameli, S. Investigating continuous biodiesel production from linseed oil in the presence of a Co-solvent and a heterogeneous based catalyst in a packed bed reactor. Energy148, 888–895 (2018).
    1. Kumar, M. V., Babu, A. V. & Kumar, P. R. The impacts on combustion, performance and emissions of biodiesel by using additives in direct injection diesel engine. Alexandria Eng. J.57, 509–516 (2018).
    1. Barik, D., Murugan, S., Samal, S. & Sivaram, N. Combined effect of compression ratio and diethyl ether (DEE) Port injection on performance and emission characteristics of a DI diesel engine fueled with upgraded biogas (UBG)-biodiesel dual fuel. Fuel209, 339–349 (2017).

LinkOut - more resources