Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 2025 Nov 10;11(11):6854-6875.
doi: 10.1021/acsbiomaterials.5c01238. Epub 2025 Oct 28.

Optimizing Titanium Nanotube (TNT) Growth on Freeform Screw Profiles via Multi-Cathode-Anode (CA) Configuration: Simulation and Experimental Insights

H Jadhav  1 , Y Patil  1 , B Ansari  1 , S S V Tatiparti  2 , S S Pande  1 , R G Mote  1
Affiliations

Optimizing Titanium Nanotube (TNT) Growth on Freeform Screw Profiles via Multi-Cathode-Anode (CA) Configuration: Simulation and Experimental Insights

H Jadhav et al. ACS Biomater Sci Eng. .

Abstract

Uniform TNT growth on complex geometries, such as screw-threaded surfaces, is challenging due to non-uniform electric fields in anodization. This study examines TNT growth on screw threads and dental implants, intending to determine the impact of geometry on the electric field distribution using Finite Element Analysis (FEA). Simulation results showed that the electric field intensity was highly variable, with increased values on teeth and decreased values on the root and flank, causing nonuniform growth of TNTs. Experimental anodization coupled with Field-Emission Scanning Electron Microscopy (FESEM) affirmed the findings with shorter TNTs on the root and more stable growth on the teeth and flanks. TNT diameter correlated with applied DC voltage, while TNT length, with variations of 6 μm, was highly sensitive to the cathode design. To solve the problem, a new multicathode anodization cell was developed to produce a uniform field distribution. By adjustment of the cathode-to-anode (CA) area ratio, it was discovered that a CA of 1 yielded the optimal results, and this resulted in uniform TNT growth in all regions. Lower CAs (e.g., 0.5:1) resulted in low field strength and incomplete TNT growth, and high CAs (2:1) led to over-dissolution and structural damage. Optimization on actual dental implants using the CA 1 setup and two-stage anodization process yielded a more controlled TNT length and diameter. The final TNT morphology on the dental implant had TNT length variations of 0.4 μm with a 100 nm diameter. These results reveal the importance of the electric field uniformity in anodizing implants with complex geometries. The proposed multicathode design presents an efficient and scalable solution for uniform TNT layer deposition on dental implants and similar freeform curved surfaces.

Keywords: electric field distribution; multi-cathode; surface curvature; titanium dioxide nanotubes (TNTs).

PubMed Disclaimer