Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
Comparative Study
. 1979 May 15;380(1):91-8.
doi: 10.1007/BF00582618.

Risk and advantages of using strongly beveled microelectrodes for electrophysiological studies in cardiac Purkinje fibers

Comparative Study

Risk and advantages of using strongly beveled microelectrodes for electrophysiological studies in cardiac Purkinje fibers

G Isenberg. Pflugers Arch. .

Abstract

Conventional microelectrodes (tips with a diameter of 0.5 micrometer, a resistance of 8 MOhm, and a tip potential of -4 mV) were mechanically beveled over a length of 1--2 micrometer (resistance 2.5 MOhm, tip potential between 0 and -1 mV). Properties thought to be relevant for intracellular techniques were studied on the cardiac Purkinje fiber. The comparison with conventional microelectrodes suggests that beveled microelectrodes have an advantage as stated: 1. Intracellular impalement is favoured by the proper shape and the greater mechanical stability; the beveled tip penetrates the connective tissue smoothly without breaking or plugging. 2. Current injection (constant current mode) can be done without blocking or polarizing the tip. The 2 microelectrode voltage clamp technique (Deck et al., 1964) is improved by having lower noise and better stability, by a faster response time, and a greater range of clamp potentials (up to +80 mV). 3. The spontaneous release of the electrolytes filling the microelectrode has a 3-fold greater rate (0.015 pMol/s); this enlargement does not change the electrophysiological properties of the fiber. 4. Intracellular pressure injection requires pressures of 0.3--1.5 bar only to inject the solutes with rates between 1 and 100 pMol/s.

PubMed Disclaimer

Similar articles

Cited by

References

    1. Acta Physiol Scand. 1976 Feb;96(2):286-8 - PubMed
    1. Science. 1974 Aug;185(4152):693-5 - PubMed
    1. J Membr Biol. 1978;40 Spec No:91-119 - PubMed
    1. Brain Res. 1970 Mar 17;18(3):565-8 - PubMed
    1. Electroencephalogr Clin Neurophysiol. 1974 Mar;36(3):323-6 - PubMed

Publication types