A segmented K-space velocity mapping protocol for quantification of renal artery blood flow during breath-holding

Abstract

Two important prerequisites for MR velocity mapping of pulsatile motion are synchronization of the sequence execution to the time course of the flow pattern and robustness toward loss of signal in complex flow fields. Synchronization is normally accomplished by using either prospective ECG triggering or so-called retrospective gating. However, if the studied vessel moves periodically in space as a result of respiratory motion, as in the case of renal arteries, a second synchronization with respect to the vessel motion in space may be necessary. One method to overcome this problem is to use the segmented k-space technique, in which the entire data acquisition can be made within a breath-hold by the sampling of several phase-encoding lines within a small time window during each heart cycle. The aim of this study was to investigate the performance of a segmented k-space velocity mapping protocol for renal artery flow determination. The protocol uses 16 phase-encoding lines per heart beat during 16 heart cycles and gives a temporal velocity resolution of 160 msec. Comparison with a conventional ECG-triggered velocity mapping protocol was made in phantoms as well as in volunteers. In our study, both methods showed sufficient robustness toward complex flow in a phantom model. In comparison with the ECG technique, the segmentation technique reduced vessel blurring and pulsatility artifacts caused by respiratory motion, and average flow values obtained in vivo in the left renal artery agreed between the two methods studied.(ABSTRACT TRUNCATED AT 250 WORDS)