Feasibility study on spray-drying protein pharmaceuticals: recombinant human growth hormone and tissue-type plasminogen activator

Abstract

The feasibility of spray-drying solutions of recombinant methionyl human growth hormone (hGH) and tissue-type plasminogen activator (t-PA) was investigated. hGH was formulated in a mannitol phosphate buffer and t-PA was used in an arginine phosphate formulation containing 0.004% (w/v) polysorbate 80. Using filtered air (90-150 degrees C) as the drying medium, hGH could be dried to a residual moisture content of < or = 4%. However, approximately 25% of the protein was degraded during the processing. Results of atomization studies suggest that surface denaturation at the air-liquid interface of the droplets in the spray plays a major role in the degradation of the protein. The addition of 0.1% (w/v) polysorbate 20 into the hGH formulation reduced the formation of soluble and insoluble aggregates by approximately 90% during atomization. During spray-drying the addition of 0.1% (w/v) polysorbate 20 reduced the formation of soluble and insoluble aggregates by approximately 70 and 85%, respectively. In contrast, t-PA remained intact upon atomization. Depending on the spray-drying conditions, product powders with a residual moisture content between 5 and 8% were obtained. No oxidation, aggregation, or denaturation occurred in the protein under several operation conditions. Overall, this study demonstrates that it is feasible to spray-dry t-PA in the current marketed formulation.