The effect of custom tray material type and surface treatment on the tensile bond strength of an impression material/adhesive system
- PMID: 8397701
The effect of custom tray material type and surface treatment on the tensile bond strength of an impression material/adhesive system
Abstract
The purpose of this investigation was to evaluate the tensile bond strength of one type of impression material adhesive to three different custom tray materials: one autopolymerizing (Fastray) and two light-polymerizing (Triad and Extoral). The effect of different surface treatments was evaluated for each of the materials. No significant difference in impression material adhesive mean tensile bond strengths was exhibited for any of the materials as the result of variations in the surface treatment. It was observed that the Triad tray material groups, with different surface treatments, exhibited significantly higher impression material adhesive mean tensile bond strengths than the autopolymerizing tray resin and the Extoral light-polymerizing material.
Similar articles
-
The effect of custom tray material type and adhesive drying time on the tensile bond strength of an impression material/adhesive system.Int J Prosthodont. 1994 Mar-Apr;7(2):129-33. Int J Prosthodont. 1994. PMID: 8003192
-
The effect of different adhesives on vinyl polysiloxane bond strength to two tray materials.J Prosthet Dent. 2005 Sep;94(3):209-13. doi: 10.1016/j.prosdent.2005.06.011. J Prosthet Dent. 2005. PMID: 16126072
-
Bond strength of three nonaqueous elastomeric impression materials to a light-activated resin tray.Int J Prosthodont. 1992 Jan-Feb;5(1):55-8. Int J Prosthodont. 1992. PMID: 1520444
-
Polyvinyl siloxane impression materials: a review of properties and techniques.J Prosthet Dent. 1992 Nov;68(5):728-32. doi: 10.1016/0022-3913(92)90192-d. J Prosthet Dent. 1992. PMID: 1432791 Review.
-
Polyvinyl siloxane impression materials: an update on clinical use.Aust Dent J. 1998 Dec;43(6):428-34. doi: 10.1111/j.1834-7819.1998.tb00204.x. Aust Dent J. 1998. PMID: 9973714 Review.
Cited by
-
An in vitro study of the bond strength of five adhesives used for vinyl polysiloxane impression materials and tray materials.J Indian Prosthodont Soc. 2014 Mar;14(1):61-6. doi: 10.1007/s13191-012-0243-5. Epub 2013 Jan 6. J Indian Prosthodont Soc. 2014. PMID: 24604999 Free PMC article.
-
Drying time of tray adhesive for adequate tensile bond strength between polyvinylsiloxane impression and tray resin material.J Adv Prosthodont. 2009 Jul;1(2):63-7. doi: 10.4047/jap.2009.1.2.63. Epub 2009 Jul 31. J Adv Prosthodont. 2009. PMID: 21165257 Free PMC article.
-
Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials-A Laboratory Peel-off Study.Materials (Basel). 2018 Oct 7;11(10):1905. doi: 10.3390/ma11101905. Materials (Basel). 2018. PMID: 30301282 Free PMC article.