Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 1996 Jan;28(3):405-10.
doi: 10.1016/0168-1605(95)00004-6.

Effect on pH heating medium on the thermal resistance of Bacillus stearothermophilus spores

Affiliations

Effect on pH heating medium on the thermal resistance of Bacillus stearothermophilus spores

M López et al. Int J Food Microbiol. 1996 Jan.

Abstract

The influence of the pH of heating medium on heat resistance of Bacillus stearothermophilus spores (ATCC 7953, 12980, 15951 and 15952) were studied. The pH values tested were: 4.0, 5.0, 6.0 and 7.0 at temperatures of 115, 120, 125, 130 and 135 degrees C. It was found that at low treatment temperatures (115 degrees C) D-values decreased between 7- and 10-fold with 7953, 12980 and 15951 strains and about 23-fold with 15952 strain when pH dropped from 7.0 to 4.0. At highest treatment temperatures (135 degrees C) D-values obtained with pH 6.0 and 7.0 did not show any significant statistical differences (p > 0.05). z-Values appeared to be higher when the medium was acidified, ranging from 7.58 to 8.20 and 9.43 10.0 for spores suspended in McIlvaine buffer pH 7.0 and pH 4.0, respectively, although the difference was not statistically significant. Heat resistance of strain ATCC 7953 at 120, 128, and 135 degrees C in asparagus purée and tomato purée at pH 5.0 under continuous monitoring of pH was also determined. D-values obtained in asparagus purée were similar to those obtained in buffer at the same pH, whereas those observed in tomato purée were found to be lower.

PubMed Disclaimer

Publication types

MeSH terms

LinkOut - more resources