Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 1996;54(8-9):285-98.

[Method selected for the determination of creatinine in plasma or serum. Choice of optimal conditions of measurement]

[Article in French]
Affiliations
  • PMID: 9092308

[Method selected for the determination of creatinine in plasma or serum. Choice of optimal conditions of measurement]

[Article in French]
D Labbé et al. Ann Biol Clin (Paris). 1996.

Abstract

The method selected by the SFBC (Société française de biologie clinique) is derived from the colorimetric reaction of creatinine with alkaline picrate, measured kinetically, without any pretreatment step. The key parameters of the reaction determining the quality of the results are studied, with special regard to samples including known interferents. The aims of the study were to gain an optimal analytical sensitivity and to reduce main interferences (acetoacetate, bilirubine, glucose, protein) which plague the Jaffé reaction, through a comprehensive study of the reagents, of their concentrations and of the analytical procedures. The selected concentrations (in the test) are: 150 mmol/L sodium hydroxide, 10 mmol/L picric acid and 2 g/L sodium dodecyl sulfate. Ten millilitres of a BRIJ solution (30% volvol) are added to the reagent. The operating procedures are as follow: sample ratio 0.07 to 0.08; wavelength 505 to 510 nm; temperature 37 degrees C; incubation of the specimen with the alkaline reagent 5 mn (at least), before starting the reaction with picric acid. A seric calibrator is recommended. The first measurement is taken 20 to 40 s after starting the reaction. Total measurement time is 120 to 150 seconds.

PubMed Disclaimer

Publication types