Biomechanical characterization of osseointegration during healing: an experimental in vivo study in the rat

Abstract

This study reports torsion tests and pull-out tests on osseointegrated commercially pure titanium fixtures. The tests were performed in vivo on a total of 26 rats. Three fixtures with a diameter of 2.0 mm were installed bilaterally in the proximal tibia in each animal. The mechanical testing was performed immediately after installation, after 2, 4, 8 and 16 weeks of unloaded healing. The torsional strength started to increase after 4 weeks of unloaded healing and there was a significant increase with time during the initial 16 weeks. The pull-out load increased rapidly during the first 4 weeks; thereafter, a moderate increase occurred during the following 12 weeks. A histological evaluation was performed after 0, 4, 8 and 16 weeks. There were significant (P < 0.01) correlations between torque and percentage of bone in contact with the fixture, and between pull-out load and the bone thickness around the fixture (P < 0.001). Estimations of shear stresses and shear moduli in the bone tissue (pull-out test) and at the interface (torque test) indicated that the increase in bone volume around the implant substantially improved the mechanical capacity.