Three-dimensional pushrim forces during two speeds of wheelchair propulsion
- PMID: 9354497
- DOI: 10.1097/00002060-199709000-00013
Three-dimensional pushrim forces during two speeds of wheelchair propulsion
Abstract
Upper limb pain frequently occurs in manual wheelchair users. Analyzing the pushrim forces and hub moments occurring during wheelchair propulsion is a first step in gaining insight into the cause of this pain. The objectives of this study were as follows: to describe the forces and moments occurring during wheelchair propulsion; to obtain variables that characterize pushrim forces and are statistically stable; and to determine how these variables change with speed. Convenience samples (n = 6) of paralympic athletes who use manual wheelchairs for mobility and have unimpaired arm function were tested. Each subject propelled a standard wheelchair on a dynamometer at 1.3 and 2.2 m/s. Biomechanical data were obtained using a force- and moment-sensing pushrim and a motion analysis system. A number of variables that describe the force and moment curves were evaluated for stability using Cronbach's alpha. Those measures found to be stable (alpha > 0.8) at each speed were then examined for differences associated with speed. The tangential, radial, and medial-lateral forces were found to comprise approximately 55, 35, and 10% of the resultant force, respectively. In addition to duration of stroke and propulsion, the following variables were found to be stable and to differ with speed (1.3 m/s +/- SD; 2.2 m/s +/- SD): peak force tangential to the pushrim (45.9 +/- 17.9 N; 62.1 +/- 30 N), peak moment radial to the hub (9.8 +/- 4.5 N x m 13.3 +/- 6 N x m), maximum rate of rise of the tangential force (911.7 +/- 631.7 N/sec; 1262.3 +/- 570.7 N/sec), and maximum rate of rise of the moment about the hub (161.9 +/- 78.3 N x m/s; 255.2 +/- 115.4 N x m/s). This study found stable parameters that characterize pushrim forces during wheelchair propulsion and varied with speed. Almost 50% of the forces exerted at the pushrim are not directed toward forward motion and, therefore, either apply friction to the pushrim or are wasted. Ultimately, this type of investigation may provide insight into the cause and prevention of upper limb injuries in manual wheelchair users.
Similar articles
-
Wrist biomechanics during two speeds of wheelchair propulsion: an analysis using a local coordinate system.Arch Phys Med Rehabil. 1997 Apr;78(4):364-72. doi: 10.1016/s0003-9993(97)90227-6. Arch Phys Med Rehabil. 1997. PMID: 9111455
-
Shoulder and elbow motion during two speeds of wheelchair propulsion: a description using a local coordinate system.Spinal Cord. 1998 Jun;36(6):418-26. doi: 10.1038/sj.sc.3100588. Spinal Cord. 1998. PMID: 9648199 Clinical Trial.
-
Pushrim forces and joint kinetics during wheelchair propulsion.Arch Phys Med Rehabil. 1996 Sep;77(9):856-64. doi: 10.1016/s0003-9993(96)90270-1. Arch Phys Med Rehabil. 1996. PMID: 8822674 Clinical Trial.
-
Pushrim biomechanics and injury prevention in spinal cord injury: recommendations based on CULP-SCI investigations.J Rehabil Res Dev. 2005 May-Jun;42(3 Suppl 1):9-19. doi: 10.1682/jrrd.2004.08.0103. J Rehabil Res Dev. 2005. PMID: 16195959 Review.
-
Wheelchair propulsion biomechanics and wheelers' quality of life: an exploratory review.Disabil Rehabil Assist Technol. 2011;6(5):365-77. doi: 10.3109/17483107.2010.525290. Epub 2010 Oct 11. Disabil Rehabil Assist Technol. 2011. PMID: 20932232 Review.
Cited by
-
Development of an automated method to detect sitting pivot transfer phases using biomechanical variables: toward a standardized method.J Neuroeng Rehabil. 2012 Feb 3;9:7. doi: 10.1186/1743-0003-9-7. J Neuroeng Rehabil. 2012. PMID: 22305052 Free PMC article.
-
A 2D lightweight instrumented wheel for assessing wheelchair functionality/activity.J Rehabil Assist Technol Eng. 2023 Feb 7;10:20556683231155198. doi: 10.1177/20556683231155198. eCollection 2023 Jan-Dec. J Rehabil Assist Technol Eng. 2023. PMID: 36777716 Free PMC article.
-
Wheelchair propulsion biomechanics: implications for wheelchair sports.Sports Med. 2001;31(5):339-67. doi: 10.2165/00007256-200131050-00005. Sports Med. 2001. PMID: 11347685 Review.
-
SMARTWheel: From concept to clinical practice.Prosthet Orthot Int. 2009 Sep;33(3):198-209. doi: 10.1080/03093640903082126. Prosthet Orthot Int. 2009. PMID: 19658010 Free PMC article.
-
The influence of altering push force effectiveness on upper extremity demand during wheelchair propulsion.J Biomech. 2010 Oct 19;43(14):2771-9. doi: 10.1016/j.jbiomech.2010.06.020. Epub 2010 Aug 2. J Biomech. 2010. PMID: 20674921 Free PMC article.
Publication types
MeSH terms
Grants and funding
LinkOut - more resources
Full Text Sources